***Local Delivery Only (Hong Kong)***

• Water sensor
• Relay
• Shore electricity sensor
• Mobile application
• WEB App
• Battery sensor
• Presence sensor
• Tracking
• Geo-Fence
• Wireless

Wireless sensor system DOKENSIP EVO

We have added high technology to our nautical experience to help you to look after and protect your boat.

DOKENSIP EVO constantly monitors the status of your boat, ensuring its safety and your peace of mind, and instantly alerts you of any possible incident.

Also, whenever you want, you can check your mobile phone app or in Internet all the updated information about your boat that DOKENSIP EVO is currently processing.

DOKENSIP EVO is a wireless sensor system comprising a central module (CORE) and a series of sensors distributed around your boat.

• With DOKENSIP EVO you can know the voltage of the batteries, the presence of water in the different bilges, monitor presence of gas or smoke, detect movement inside and know that the electricity from the jetty reaches the inside of the boat without problems.
• DOKENSIP EVO will control through a CORE module up to 16 different sensors on your boat, and the sensor system can be extended/reduced very easily.
• DOKENSIP EVO will send you an alarm signal when something goes wrong so you are assured that your boat is fine.
• You will control all your boats from a single application, knowing their statuses at a glance.

Most important features

These are the most important features offered by DOKENSIP EVO.

Status of your boat

Thanks to DOKENSIP EVO and its sensors you can know the status of your boat.

Alert management

Decide who you want the alerts to reach, you can establish up to three contacts.

Tracking

You can know the position of your boat at all times, even the routes you have made in the last month

Geo-Fence

Sets the perimeter of your base port

Multidevice management applications

You can check the status of your boat from any device.

Dokies

With Dokies, boat alarms are treated as warnings.

Wireless

More simple, wireless, no installation.

Telephone technical support

Contact us by phone, for greater efficiency.

Where to put them?

Select a sensor from the list below and see indicated its possible location in the boat.

CORE

It is the heart of the system. It collects information on the position of the boat at its mooring or berth and on the sensors on it.

It also manages the alarms of the sensors, and sends the information.

Battery voltage sensor

This sensor is connected directly to the boat batteries and sends the information of the voltage. If the voltage is out of the range set by the user, an alarm will be sent.

Shore electricity sensor

This sensor is connected to the 220V electricity input of the boat. If the power supply fails, an alarm will be sent.

Water sensor

This sensor is placed in the bilge, sending an alarm signal when it detects water in it.

Relay

You can control the activation of devices on your boat.

Temperature sensor

This sensor sends the temperature information. If the temperature outside the range set by the user, an alarm will be sent.

Presence sensor

This sensor detects any presence inside sending an alarm if movement is detected inside the boat.

DOKENSIP EVO – Video

MUCH MORE THAN AN ALARM FOR BOATS.

Enjoy the complete peace of mind offered by our full DOKENSIP pack. The main module CORE plus the 4 wireless sensors included in the pack allow you to monitor the state of your boat as well as receiving alerts of any kind through our MAP process when something happens onboard. Besides, you will not have to worry about the state of the sensors: thanks to the FCS system of DOKENSIP, you will monitor the state of each sensor and you will be able to customize your alerts just as you wish.

Technical specifications

Born from necessity

• 100% WIRELESS (Patented)
• FCS (FULLY CONTROLLED SYSTEM)
• MAP (MULTICHANNEL ALERT PROCESS)
• GLOBAL COVERAGE

Easy to install

The pack includes

• CORE main module
• Water sensor DKA
• Battery sensor DKB
• Motion sensor DKP
• Shore power sensor DKC
• Dokie
• Activation card.
• 3M adhesive tape.
• External GPS antena.
• External data antenna.
• 12V Power supply cable.
• 1 year free subscription.

Whats in my YACHTPROTECTOR Evo box?

1. Open the box and check that all the components indicated in the manual are inside.
2. Connect the CORE module to 12v OR 24V power. Always ensure that the CORE is connected to 12 or 24 volt power before attempting to register your system.
3. Install the two antennas; Communications antenna on the left where labelled Data and GPS antenna on the right where labelled GPS.
4. (Plug in every sensors cable, and put in batteries in each one.
5. Switch on your Yacht Key by pressing in the logo for 2/3 seconds, you will see blue light on for 4 seconds. If you want to switch it off, press in the logo again, you will see blue light flashing 5 times.
6. Download YACHTPROTECTOR Evo app from your store. Please, ensure to download EVO version, not the old one.
7. Complete registration from your apps login screen, by tapping on Register new Pack. Fill in required information, and provide a valid phone number when asked, as you will receive a confirmation SMS.
8. Log in the App with the User Name and Password you established during your registration in the first step. These will be used to receive the subsequent installation messages and alert messages, unless you change them in the future.
9. Your systems sensors are factory linked to the core, so they will start sending information as soon as theyre connected.
10. We recommend installing the Sensors with the provided VHB (High Bond) adhesive, it is recommended to prepare the surface by cleaning with the included surface prep or with alcohol or acetone to ensure a better adhesion to the surface.
11. The system will be considered stable approximately half an hour after installing all the Sensors.

NOTE: Keep in mind, when installing Sensors, any objects, bulkheads, equipment, etc. all could interfere with the Sensor’s transmission. This is especially true when mounting the Water Sensor and/or the Battery Sensor if they are located in a soundproof engine room or under or nearby metal shields or facings. In these situations, take care to place the Sensors a sufficient distance away from solid metal objects so they will have the most connectivity by not directly blocking transmission since the frequency waves will go around most objects if not immediately adjacent to them, or use the supplied cable to move the Sensor to the best position away from such possible direct barriers.